Foamed Silicone Rubber
SA700-200 is a highly compressible, ultrasoft silicone foam. The combination of low weight and softness makes it an ideal choice where low closure force and sealing are critical. The patented chemistry and cell structure provide a long-term performance advantage.
- Описание
- Principles
- Silicone Foam Ceramifiable Series
- Silicone Foam Low Density Series
- Silicone Foam Standard Density Series
- Silicone Foam Overview
【Features And Benefits 】
- Environmentally friendly.
- Good electrical insulation performance.
- Good flexibility and high compression ratio.
【Configurations Available 】
- Sheet products: Customized.
- Die-cut products: Customized
Principles of Thermal Interface Material
1. There are three modes of heat transfer: conduction, convection, and radiation.
2. When a chip is directly bonded to a heatsink, there exists a microscopic gap between the two interfaces. The thermal conductivity of the air in this gap is only 0.026W/m·K, which hinders heat conduction.
3. Thermal Interface Materials are used to fill the gaps between heat-generating components and heatsinks, eliminating the air at the interface and efficiently conducting heat.
Currently, SHEEN's SF series of Silicone Thermal Pad can achieve a thermal conductivity of 15W/m·K.
2. When a chip is directly bonded to a heatsink, there exists a microscopic gap between the two interfaces. The thermal conductivity of the air in this gap is only 0.026W/m·K, which hinders heat conduction.
3. Thermal Interface Materials are used to fill the gaps between heat-generating components and heatsinks, eliminating the air at the interface and efficiently conducting heat.
Currently, SHEEN's SF series of Silicone Thermal Pad can achieve a thermal conductivity of 15W/m·K.
Thermal Interface Material(TIM)
Why Ceramifiable Silicone?
Ceritifiable silicone is engineered to transform into a rigid ceramic-like layer at elevated temperatures.
This helps block flame penetration, slow heat transfer, and maintain sealing integrity in fire events, supporting safer designs for EV batteries and energy storage systems.
This helps block flame penetration, slow heat transfer, and maintain sealing integrity in fire events, supporting safer designs for EV batteries and energy storage systems.
SA700-350-C Ceramified Thermal Insulation Silicone Foam
(Foam, for fire barrier & insulation)
Color: Gray
Thickness (typ.): 4.2+/-0.4 mm
Density: 300-600 kg/m³
Electrical insulation: >1x10^15 Ω·cm
Flame rating: Cold side 140°c @ 600°C/5 min(2.0 mm)
Thickness (typ.): 4.2+/-0.4 mm
Density: 300-600 kg/m³
Electrical insulation: >1x10^15 Ω·cm
Flame rating: Cold side 140°c @ 600°C/5 min(2.0 mm)
Compressive stress (kPa): 10/20/30/40/50%=56/87/114/159/244
Source: SA700-350-C TDS. Values are typical.
Source: SA700-350-C TDS. Values are typical.
SM150 Ceramifiable Solid Silicone Gasket
(Solid sheet, high insulation & dielectric strength)
Color: White
Thickness (typ.): 0.3+/-0.03 mm
Density: 1500+/-30 kg/m³
Electrical insulation: >1x10^14 Ω·cm
Breakdown voltage: >5.0 kV
Thermal conductivity: <0.3 W/mK
Flame rating: UL94 V-0
Thickness (typ.): 0.3+/-0.03 mm
Density: 1500+/-30 kg/m³
Electrical insulation: >1x10^14 Ω·cm
Breakdown voltage: >5.0 kV
Thermal conductivity: <0.3 W/mK
Flame rating: UL94 V-0
Source: SM150 TDS. Values are typical.
Optional Constructions (not model-specific)
Plain foam/Sheen, PSA-laminated, or fiberglass-reinforced structures:single-layer scrim/core scrim / 3-layer scrim
Key Features
1. Very low density for lightweight designs and improved comfort.
2. Low closure force for delicate housings and thin-wall enclosures.
3. Closed-cell structure for water/moisture sealing and ingress protection.
4. Excellent resilience and low compression set for long-term sealing.
5. Ozone/UV resistance for outdoor and harsh-environment applications.
6. UL 94 V-0 flame-retardant silicone foam adds an extra layer of fire protection
safety while maintaining ultra-soft sealing and low closure force.
2. Low closure force for delicate housings and thin-wall enclosures.
3. Closed-cell structure for water/moisture sealing and ingress protection.
4. Excellent resilience and low compression set for long-term sealing.
5. Ozone/UV resistance for outdoor and harsh-environment applications.
6. UL 94 V-0 flame-retardant silicone foam adds an extra layer of fire protection
safety while maintaining ultra-soft sealing and low closure force.
Typical Applications
1. Consumer electronics enclosures(dust/water sealing).
2. Wearables and handheld devices require soft sealing.
3. Battery pack covers and lightweight gasketing.
4. Noise & vibration isolation pads(NVH).
5. Die-cut gasket tapes, custom CNC-cut parts.
2. Wearables and handheld devices require soft sealing.
3. Battery pack covers and lightweight gasketing.
4. Noise & vibration isolation pads(NVH).
5. Die-cut gasket tapes, custom CNC-cut parts.
| Grade | Density(kg/m³） | Thickness(mm） | Typical Use |
|---|---|---|---|
| SA700-200 | 200±30 | 0.5-6.0 | ultra-sofa sealing, very low closure force |
| SA700-260 | 260 | 0.5-6.0 | Soft sealing & light cushioning |
Nominal values for selection. SA/0U-20U typical properties:
working temperature -50 to 220°C,
density 200+30 kg/m³,
thickness 0.5-6.0 mm;
Consult Sheen for detailed TDS and conversion data.
working temperature -50 to 220°C,
density 200+30 kg/m³,
thickness 0.5-6.0 mm;
Consult Sheen for detailed TDS and conversion data.
Selection Guide
1. Density: <300 kg/m³ for ultra-soft sealing and low closure force.
2. Thickness: 0.5-6.0 mm(custom thickness, die-cuts and laminationsavailable).
3. Construction: Plain /PSA backing /fiberglass reinforcement (on request).
2. Thickness: 0.5-6.0 mm(custom thickness, die-cuts and laminationsavailable).
3. Construction: Plain /PSA backing /fiberglass reinforcement (on request).
Silicone Foam
Standard Density Series
■Performance Highlights
1. Balanced density range for broad sealing and cushioning.
2. Closed-cell structure supports weather sealing and
moisture resistance.
3. Low compression set for stable long-term sealing under continuous load.
4. Good rebound for repeated compression cycles.
Plain sheet, PSA-backed tape, and reinforced options
available.
1. Balanced density range for broad sealing and cushioning.
2. Closed-cell structure supports weather sealing and
moisture resistance.
3. Low compression set for stable long-term sealing under continuous load.
4. Good rebound for repeated compression cycles.
Plain sheet, PSA-backed tape, and reinforced options
available.
■Typical Applications
1. Industrial equipment panels and cabinet gaskets.
2. Automotive electronics enclosures and module sealing.
3. Consumer electronics: speakers, lighting, power
supplies, housings.
4. Weather seals for outdoor products and IP-rated
enclosures.
5. Cushion pads, spacers, and shock/vibration damping
components.
1. Industrial equipment panels and cabinet gaskets.
2. Automotive electronics enclosures and module sealing.
3. Consumer electronics: speakers, lighting, power
supplies, housings.
4. Weather seals for outdoor products and IP-rated
enclosures.
5. Cushion pads, spacers, and shock/vibration damping
components.
Selection Guide
Density: 200-600kg/m³ （Low-Decsity ＜ 300kg/m³ ；Standard 300-600kg/m³ );
Thickness: 0.5-6.0mm standard; up to 20.0mm upon request;
Constructions: plain/ PSA / Fiberglass-reinforced (see Page 5)
Thickness: 0.5-6.0mm standard; up to 20.0mm upon request;
Constructions: plain/ PSA / Fiberglass-reinforced (see Page 5)
SA700 Silicon Foam - Grade Matrix(nominal)
| Model | Density kg/m³ | Thickness, mm | Compression Set,at50%, 100℃ | Elongation | Flame Rating, UL94 | Operating Temp., ℃ |
|---|---|---|---|---|---|---|
| SA700-200 | 200 | 0.5~6.0 | <5% | 60% | V-0 | -55~200 |
| SA700-260 | 260 | 0.5~6.0 | <5% | 70% | V-0 | -55~200 |
| SA700-300 | 300 | 1.0~6.0 | <5% | 60% | V-0 | -55~200 |
| SA700-350 | 350 | 1.0~6.0 | <5% | 90% | V-0 | -55~200 |
| SA700-400 | 400 | 1.0~6.0 | <5% | 80% | V-0 | -55~200 |
| SA700-500 | 500 | 1.0~6.0 | <5% | 70% | V-0 | -55~200 |
| SA700-600 | 550±50 | 1.0~6.0 | <5% | >90% | V-0 | -55~200 |
*From SA700-200 TDS: Compression force deflection, 25% deflection (ASTM D3574).For detailed TDS and customized thickness/constructions, contact Sheen.
Silicone Foam Overview
Key Benefits
Custom die-cutting, PSA lamination, fiberglass reinforcement and rapid sampling available upon request.
Common Applications & Industries
1. Gaskets & seals.
2. Fire blocks /fire walls.
3. Thermal barriers & insulation.
4. Noise & vibration dampening(NVH).
5. Press pads & spacing cushions.
6. EV battery packs: moisture/debris/vibration/shock protection. Die-cut/CNC-cut parts, gasket tapes, custom fabricated components.
Industries: Aviation, Automotive, Electronics, Medical equipment, Marine Construction, Furniture, Mass transit
2. Fire blocks /fire walls.
3. Thermal barriers & insulation.
4. Noise & vibration dampening(NVH).
5. Press pads & spacing cushions.
6. EV battery packs: moisture/debris/vibration/shock protection. Die-cut/CNC-cut parts, gasket tapes, custom fabricated components.
Industries: Aviation, Automotive, Electronics, Medical equipment, Marine Construction, Furniture, Mass transit
Sheen Silicone Foam Portfolio
Standard Density Series
Balanced sealing & cushioning.
Density:300-600 kg/m³.
Thickness:1.0-6.0 mm.
For general enclosures, equipment
panels, and gasket tapes.
Density:300-600 kg/m³.
Thickness:1.0-6.0 mm.
For general enclosures, equipment
panels, and gasket tapes.
Low-Density Series
Ultra-soft sealing with low closure
force.
Density:<300 kg/m³.
Thickness:0.5-6.0 mm.
For light-load sealing, delicate housings, and vibration isolation.
force.
Density:<300 kg/m³.
Thickness:0.5-6.0 mm.
For light-load sealing, delicate housings, and vibration isolation.
Ceramifiable Series
Fire barrier & thermal runaway
protection.Ceramic conversion
under flame/heat. For EV battery packs and safety partitions. Foam and ceramifiable silicone sheet
solutions.
protection.Ceramic conversion
under flame/heat. For EV battery packs and safety partitions. Foam and ceramifiable silicone sheet
solutions.
